commercial sectionals,

Commercial Aspen™ AP200C
Sectional Raised and Recessed Panel Doors
A perfect commercial-sized companion for the residential Aspen doors, this full 2", 18.0 R-value sectional raised and recessed panel commercial door will brighten up the appearance of any building, inside and out. Available in a wide range of colors.

Commercial Aspen™ AP138C
Sectional Raised and Recessed Panel Doors
Raynor Commercial Aspen AP138C is 1-3/8" thick with a 13.0 R-value perfect for the RV or boat storage garage and matches the raised colonial, raised ranch, recessed grooved colonial, recessed grooved ranch, mixed panel, plank or flush look of the residential Aspen doors. Available in 8 colors or two woodgrain finishes.

AlumaView® AV300
Aluminum Sectional Rail and Stile Doors A full 3″ thick, the Raynor AV300 is the sturdiest door in the AlumaView family. The increased thickness adds increased strength and durability. With the incorporation of the U-bar trussing inside the rails, there are no obstructions to your view. The AV300 is the clear choice for auto dealerships, car washes, corrosive environments, police, fire and ambulance stations, quick lubes, repair facilities, restaurants, marinas, sports facilities and buildings with large opening sizes.

AlumaView® AV200
Sectional Raised and Recessed Panel Doors
A perfect commercial-sized companion for the residential Aspen doors, this full 2", 18.0 R-value sectional raised and recessed panel commercial door will brighten up the appearance of any building, inside and out. Available in a wide range of colors.

AlumaView® AV175
Aluminum Sectional Rail and Stile Doors
This benchmark commercial door provides Raynor reliability and durability to meet, or exceed, the requirements of daily use. With 1-3/4" thick door sections and streamlined rail construction, the Raynor AlumaView AV175 door is engineered for lasting beauty and durability.

SteelForm™ S-16
Sectional Ribbed Doors
Designed for peak performance, Raynor SteelForm S-16 heavy-duty, 16-gauge commercial sectional ribbed doors with steel skin and rugged hardware provide maximum reliability and durability for high-security in the most demanding applications, such as a busy loading dock.

SteelForm™ S-20 and S-24
Sectional Ribbed Doors
These benchmark sectional ribbed doors provide proven Raynor reliability and durability to meet, or exceed, the requirements of daily use. The Raynor SteelForm S-20 and S-24, 20 and 24-gauge doors are offered with the widest selection of quality features and options for the most common commercial door product applications.

SteelForm™ S-24C
Sectional Ribbed Doors
A simple solution for typical commercial and industrial door applications, the SteelForm S-24C commercial sectional ribbed door provides Raynor quality and durability in a limited selection of sizes, features and options.

Commercial Roll Up Door Model 1000/1000i

• A drum wheel that is 9 ½" in diameter
• Maximum opening size of 12’ wide by 14’ high (168 sq.ft.)
• A reduced, right hand only chain hoist
• Push-up, hand chain and internal electric operations

Commercial Roll Up Door Model 1100/1100i

• Pre-assembled for time and money savings
• Utilizes 9 ½" diameter drum wheel
• Maximum opening size of 10’ wide x 14’ high (140 sq.ft.)
• Push-up, hand chain and internal electric operations
• Reduced drive chain hoist is right hand only

Commercial Roll Up Doors Model 1950/1950i

• Push-up, hand chain and internal electric operations
• Utilizes 9 ½" diameter drum wheel
• Light duty applications for frequent usage
• Maximum opening size of 12’ wide x 14’ high (168 sq.ft.)

Commercial Roll Up Door Model 1950 Heavy Duty/1950 HD i

• Maximum opening size of 12’ wide x 14’ high (168 sq.ft.)
• Push-up, hand chain and electric operations

Commercial Roll Up Door Model 2000/2000i

• I A 12" drum wheel
• Push-up, hand chain and electric operations
• Maximum opening size of 12’ wide x 16’ high (192 sq.ft.)

Commercial Roll Up Door Model 2500/2500i

• Utilizes 12" drum wheel
• Maximum opening size of 18’ wide x 18’ high (324 sq.ft.)
• Push-up, hand chain and electric operations

Self Storage Commercial Doors
Each of these models are created with 26 gauge galvanized steel and available in 36 colors covered by a 40 year paint warranty.

Janus Model 650 Mini Storage Door

• Door Springs Coated with grease during production, which prevents rust and corrosion
• Enclosed in a tube for lifetime protection
• Provide for smooth door operation
• Ratchet Tensioning Device Allows for simplified spring tensioning
• Tensions all springs at once Requires no pins to hold the tension on the spring
• Radial Ball Bearings Provided at no additional cost Permanently lubricated
• Dead Axle and Torque Tube Assembly Tube housing protects springs and strengthens the axle

Janus Model 750 Mini Storage Door

• Minimizes the locking and reinforcement needed to strengthen the door to pass rigorous wind load testing.
• Fewer friction points and less additional weight results in a door that operates better and still yields greater strength than any other available to the self storage industry.
• Meets the requirements of the SBC (Standard Building Code) and ASCE 7 (American Society of Civil Engineers). The ASCE Standard is used in the Florida Building Code and the International Building Code.
• Applicable opening sizes range from 3′ wide through 10′ wide, with the maximum height being 12′.
• Locking device may be located on the curtain or the bottom bar.
• Doors may be installed on steel, concrete, or filled block jambs.
• All door sizes meet the wind load requirements of the interior and exterior zones for 100 mph SBC wind speed and 130 mph exposure B, ASCE 7 wind speed.
• Higher wind load ratings are available for certain sizes and can be determined on an individual basis.

Janus Swing Door

• Slat curtain in four standard colors (external doors)
• Meets ADA requirements for self-storage
• Opens 180 degrees, a strong safety feature and space-saving feature
• Pre-assembled for easy installation
• Special design features for external units

Porvene Series 200

• Greaseless Nylon Bearings: This exclusive feature delivers longer life than metal bearings, without costly maintenance.
• Drum Assembly: The counter balancing mechanism is housed in this unique, roll-up assembly.
• Lock Seam: The sections are lock seamed together. If one section is damaged beyond repaired, it can be easily replaced.
• Weather Seal: A blade astragal made from E.P.D.M., a highly resilient and flexible rubber compound, runs the full length of the bottom angle to seal the threshold of the opening. This forms a barrier against weather, dirt, insects and rodents.
• Guides: Roll formed single piece guide standard on all doors.
• Chain Operation: Smooth hand-chain provides safe and comfortable operation eliminating the sharp edges common to lock link hand chain.
• Locking Assembly: Exclusive tamper-proof slide bolt lock accommodates two padlocks for double protection.
• Galvanized Steel Curtain: A continuous sheet of .021" galvanized steel delivers maximum security.

Porvene Series 300

• Sealed Ball Bearings: Self-aligning and allow lasting free rotation.
• Drum Assembly: The counter balancing mechanism is housed in this unique, roll-up assembly.
• Maximum Security: All slats are manufactured from the highest quality galvanized steel with a baked enamel finish, to form an effective secure curtain. Two slide bolt locks standard on all doors. (Available in 24 or 22 gauge.)
• Weather Seal: A blade astragal made from E.P.D.M., a highly resilient and flexible rubber compound, runs the full length of the bottom angle to seal the threshold of the opening. This forms a barrier against weather, dirt, insects and rodents.
• Guides: Two pieces roll formed steel guides standard on all standard doors. Windlocks provided on larger sizes.
• Chain Operation: A minimum of a 4 to 1 reduction standard on all doors. Smooth hand-chain provides safe and comfortable operation eliminating the sharp edges common to lock link hand chain.
• Slat Configuration: All doors available in curved or flat slats. Galvanized according to ASTM A653-G60 and finished with baked epoxy primer and baked polyester topcoat.
• The Porvene Secret: State of the Art technology has allowed Porvene Doors to create a Door Dynamometer which accurately measures the torque characteristics of roll-up doors.

Porvene Series 400

• Steel Slat Curtain: All slats are manufactured from the highest quality galvanized steel with a baked enamel prime finish. Available in 24 ga., 22 ga., 20 ga., or 18 ga.,. Available in Flat or Curved. (18 ga. in Curved only).
• Drum Assembly. The counter balancing mechanism is housed in this unique, roll-up assembly.
• Guides: Minimum 3/16" structural steel angle. (Roll formed guides on 24 gauge doors up to 14’0 x 14’0.)
• Bottom Bar: Two 2" x 2" x 1/8" thick structural steel angles form a rugged bottom bar assembly. A rubber bottom astragal helps to conform to floor irregularities and helps guard against weather, dirt, insects and rodents.
• Pipe Barrel: Continuous 6" minimum diameter pipe to support curtain with no more than .03" of deflection per foot of width.
• Counterbalance: Helical torsion springs are oil tempered and grease packed. Springing is accurately calculated for every door using Porvene’s uniquely designed "Door Dynamometer".
• Door Stops: Stops are located on the inside and outside of the guides for added safety.
• Sealed Ball Bearings: Self-aligning and allow free rotation of barrel
• Chain Hoist: Heavy duty #50 roller chain and sprockets combined with a smooth hand-chain provides for safe and efficient operation. Removal of chain hoist makes door Electric Operation ready without further modification or cost.

Porvene Series 500

• Grille Curtain: Clear anodized aluminum tubes over steel rods for added strength and security.
• Guides: Clear anodized extruded aluminum with polyethylene wear strips for smooth operation
• Bottom Bar: Clear anodized aluminum with low friction nylon blocks mounted at ends for smooth and quiet operation.
• Locking: Slide bolt locks standard on all Grilles.
• Counterbalance: Helical torsion springs calculated for optimal ease of operation.
• Push up Operation: Available up to 100 square feet.

Porvene Series 600

• Insulated Slat Curtain: Environmentally Safe Polyisocyannurate insulating material housed between a 22 gauge front slat and a 24 gauge back slat.
• Guides: Structural steel wall angle with vinyl jamb weatherseal.
• Bottom Bar: Two 2" x 2" x 1/8" structural steel angles form a rugged bottom bar assembly. A vinyl bulb astragal helps to conform to floor irregularities and helps guard against weather, dirt, insects and rodents.
• Pipe Barrel: Continuous minimum 6" diameter pipe to support door curtain with no more than .03" of deflection per foot of width.
• Door Stops: Removable stops located on inside and outside of the guides for added safety.
• Hood: 24 Gauge galvanized steel with a baked enamel prime finish hood including an 8" baffle to help seal out the elements.
• Chain Hoist: Heavy duty #50 roller chain and sprockets combined with a smooth hand-chain provides for safe and efficient operation. Removal of chain hoist makes door Electric Operation ready without further modification or cost.
• Standard Color: Mohegan White

Porvene AlumaView